The Process of Windshield Repair Tucson
The steps taken to repair a damaged windshield depend on the extent of damage on the surface of the windshield. There are two main processes that can be carried out in windshield repair Tucson on a damaged windshield. The whole thing can either be replaced or local repair work done on a small area if the damage is not so great. Small damages that can be easily repaired include chips and cracks. However, the size of the crack is subject to repair. Cracks that are greater than three inches create a greater risk factor of spreading the damage over time. Therefore, anything greater than this should be completely replaced with a new windshield.
The following are some of the windshield repair practices carried out on damaged windshields:
- Chips are common and are caused by stones or small objects hitting the windshield surface. Most chips are usually very small and do not warrant the replacement of the whole windshield. During the windshield repair of chips, the surface is first cleaned and then the centre of the chip drilled to open up space of resin injection. The resin is the material used to cover up the chip. Once the resin solidifies, it holds the glass back together. The subsequent steps involve adding sufficient amounts of resin as required and smoothening out the glass surface.
- Cracks are also commonly caused by impact on the glass. The type of crack will signal whether a windshield repair Tucson is feasible or if the whole windshield should be replaced. Unlike chips, cracks require a lot more consideration and keenness when it comes to repair. It is easier to repair a single line crack than a crack with multiple branches. If the crack has many branches, you have no choice rather than to replace the whole windshield. Also, the size of the singe line crack will tell whether a windshield Tucson repair job is suitable. During crack windshield repair, the resin is injected along the whole length of the crack from the impact point. After the resin has been injected, it is then cured and allowed to dry.
- The two important components of windshield repair are the resin and the curing light. The resin is the material that is injected into the glass to fill in the spaces left by the crack or chip. It has varying levels of viscosity and is strong enough to hold the windshield. The resin used to repair cracks is stronger and more viscous than that used in the repair of chips. The curing light just acts as a catalyst in speeding up the process and also improving the quality of the repair job. This enables the client to pick up their vehicle as soon as possible after the repair job.
The type of windshield repair Tucson that is carried out on a vehicle depends greatly on the extent of damage. Therefore, you should have an expert examine your vehicle before paying for any unnecessary services.
